Kétkomponensű szteroid elegy szimulált mozgóágyas elválasztásának számítógéppel segített tervezése I.

Szerzők

  • Temesvári Krisztina Gedeon Richter Ltd., H-1475 Budapest 10. P.O.B. 27., Hungary , Richter Gedeon Rt., 1103 Budapest, X., Gyömrői út 19–21.
  • Aranyi Antal Gedeon Richter Ltd., H-1475 Budapest 10. P.O.B. 27., Hungary , Richter Gedeon Rt., 1103 Budapest, X., Gyömrői út 19–21.
  • Balogh Sándor University of Kaposvár, H-7400 Kaposvár, Guba Sándor u. 40., Hungary , Kaposvári Egyetem, 7400 Kaposvár, Guba Sándor u. 40.
  • Bánkuti Gyöngyi University of Kaposvár, H-7400 Kaposvár, Guba Sándor u. 40., Hungary , Kaposvári Egyetem, 7400 Kaposvár, Guba Sándor u. 40. https://orcid.org/0000-0001-9055-1890 (unauthenticated)
  • Csukás Béla University of Kaposvár, H-7400 Kaposvár, Guba Sándor u. 40., Hungary , Kaposvári Egyetem, 7400 Kaposvár, Guba Sándor u. 40. https://orcid.org/0000-0003-3781-8175 (unauthenticated)

Kulcsszavak:

szimulált mozgóágy, preparatív kromatográfia, dinamikus szimuláció, folyamattervezés

Absztrakt

A szimulált mozgóágyas (SMB) kromatográfiás elválasztás kvázi-stacionárius, ellenáramú művelet, nagyszámú paraméterrel, ezért a folyamattervezést és optimálást szinte lehetetlen pusztán kísérleti úton megoldani. Jelen és következő közleményünkben az általunk kidolgozott folyamattervezési és optimálási metodikát kívánjuk ismertetni, kétkomponensű nem-izomer szteroid keverék SMB elválasztásának példáján bemutatva. Ez magában foglalja az alapadatok kísérleti meghatározását (adszorpciós egyensúly mérése, kinetika, hidrodinamika identifikálása az SMB oszlopokban); Morbidelli úgynevezett „háromszög elméletének” alkalmazását, egy megvalósítható kezdeti megoldás paraméter együttesének meghatározása céljából; az optimális műveleti paraméterek meghatározását számítógépes szimuláció alkalmazásával.

Információk a szerzőről

  • Temesvári Krisztina, Gedeon Richter Ltd., H-1475 Budapest 10. P.O.B. 27., Hungary, Richter Gedeon Rt., 1103 Budapest, X., Gyömrői út 19–21.

    levelezőszerző
    k.temesvari@richter.hu

Hivatkozások

Blehaut, J, Nicoud, R. M. (1998). Recent aspects in simulated moving bed. Analysis Magazine, 26(7), 60–70. https://doi.org/10.1051/analusis:199826070060

Charton, F, Nicoud, R. M. (1995). Complete design of a simulated moving bed. J. Chromatogr. A., 702(1–2), 97–112. https://doi.org/10.1016/0021-9673(94)01026-B

Csukás, B. (1998). Simulation by Direct Mapping of the Structural Models onto Executable Programs. AIChE Annual Meeteng, Miami, Paper #239/9.

Csukás, B., Balogh, S., Kováts, S., Aranyi, A., Kocsis, Z., Bartha, L. (1999). Process Design by Controlled Simulation of the Executable Structural Models. Comput. Chem. Engng., 23(Suppl.), 569–572. https://doi.org/10.1016/S0098-1354(99)80140-9

Csukás, B., Bánkuti, Gy. (2003). Direct computer mapping of process models. In: Grossmann IE and McDonald C (eds) Foundations of Computer Assisted Process Operations, A View to the Future Integration of R&D, Manufacturing and the Global Supply Chain, AIChE INFORMS, 577–581.

Csukás, B., Bánkuti, Gy. (2003). Hybrid, quantitative and qualitative process simulation by the Generic Bi-layered Net model. In: Proceedings of 2003 IEEE International Symposium on Intelligent Signal Processing, Budapest, 283–289. https://doi.org/10.1109/ISP.2003.1275853

Csukás, B., Bánkuti, Gy. (2003). Generic Bi-layered Net model of conservational and informational processes. In: Dagli, Buczak, Ghosh, Embrechts and Ersoy (eds) Smart Engineering System Design: Neural Networks, Fuzzy Logic, Evolutionary Programming, Data Mining and Complex Systems ASME Press, New York, 769–774.

Gentilini, A., Migliorini, C., Mazzotti, M., Morbidelli, M. (1998). Optimal operation of simulated moving-bed units for non-linear chromatographic separations II. Bi-Langmuir isotherm. J. Chromatogr. A., 805(1–2), 37–44. https://doi.org/10.1016/S0021-9673(98)00006-5

Gritti, F., Gotmar, G., Stanley, J. B., Guiochon, G. (2003). Determination of single component isotherms and affinity energy distribution by chromatography. J. Chromatogr. A., 988(2), 185–203. https://doi.org/10.1016/S0021-9673(02)02084-8

Guiochon, G., Golshan Shirazi, S., Katti, A. M. (1994). Fundamentals of Preparative and Nonlinear Chromatography, Academic Press, London, 49–135.

Jacobson, J., Frenz, J., Horváth, Cs. (1984). Measurement of adsorption isotherms by liquid chromatography. J Chromatogr, 316. 53–68. https://doi.org/10.1016/S0021-9673(00)96140-5

Jacobson, J. M., Frenz, J. H., Horváth, Cs. (1987). Measurement of competitive adsorption isotherms by frontal chromatography. Ind. Eng. Chem. Res., 26(1), 43–50. https://doi.org/10.1021/ie00061a009

Juza, M., Mazzotti, M., Morbidelli, M. (2000). Simulated moving-bed chromatography and its application to chirotechnology. TIBTECH, 18(3), 108–118. https://doi.org/10.1016/S0167-7799(99)01419-5

Mazzotti, M., Storti, G., Morbidelli, M. (1997). Optimal operation of simulated moving bed units for nonlinear chromatographic separation. J. Chromatogr. A., 769(1), 3–24. https://doi.org/10.1016/S0021-9673(97)00048-4

Migliorini, C., Mazzotti, M., Morbidelli, M. (1998). Continuous chromatographic separation through simulated moving beds under linear and nonlinear conditions. J. Chromatogr. A., 827(2), 161–173. https://doi.org/10.1016/S0021-9673(98)00643-8

Nicoud, R. M. (1999). The separation of optical isomers by simulated moving bed chromatography. Pharmaceutical Technology Europe, 11. 36–44.

Nicoud, R. M. Bailly, M. (1992). Choice and optimization of operating mode in industrial chromatography. Proceedings of „PREP 92”, NANCY (France), 6–8 April.

Letöltések

Megjelent

2004-10-15

Hogyan kell idézni

Temesvári, K., Aranyi, A., Balogh, S., Bánkuti, G., & Csukás, B. (2004). Kétkomponensű szteroid elegy szimulált mozgóágyas elválasztásának számítógéppel segített tervezése I. Acta Agraria Kaposváriensis, 8(3), 117-133. https://journal.uni-mate.hu/index.php/aak/article/view/1719

Ugyanannak a szerző(k)nek a legtöbbet olvasott cikkei